- Stock: In Stock
- Brand: V-Tech
- Model: VT-224
- Weight: 10.00kg
Description
• VT-224 Rainbow Seal is a premium quality acrylic sealant formulated for sealing gaps and joints where conventional fillers would crack and fall off with slight movements and vibrations.
• VT-224 has various colours selection, making it suitable to match with the colour of the building materials to be sealed.
Features
• Low VOC compliance
• Various colours available
• Dries true to wet colour
• Permanently flexible
Specification
• Base: Water-based acrylic
• Physical State: Soft paste
• Tooling Time / Working Time: <15 minutes (at 25°C & 50% R.H.)
• Skin-Form Time: 15 minutes
• Available Colour
Standard Colours
- (BA0) Black
- (B20) Brown
- (B21) Light brown
- (B22) Dark brown
- (B40) Beige
- (B50) Barley
- (C30) Coffee
- (G10) Grey
- (G14) Greenish grey
- (M10) Merbau
- (SA0) Cherry
- (T20) Teak
- (T30) Terra cotta
- (W10) White
- (G15) Charcoal Grey
• Packaging: 450 g/ cartridge (24 cartridges/carton)
• Shelf Life: 24 months
• Storage: Store in a dry and cool place with temperature below 30 °C (Do not store below 5 °C)
• Application Temperature: 5 °C – 50 °C
• Service Temperature: -10 °C – 75 °C
• Base: Water-based acrylic
• Curing System: Water evaporation
• Specific gravity: 1.61 g/mL
• Solid content: 81 %
• Maximum Tensile strength: 1.0 N/mm² ASTM D412
• Elongation at break: 190 % ASTM D412
• Shore A Hardness: 20 ASTM C661
• Low VOC compliance: Yes SCAQMD Rule 1168
• VOC content: 36.97 g/L USEPA Method 24
Application
• With a wide variety of colours, one can match the colour of various construction materials.
• General sealing applications (door and window joints, cabinet and wardrobe installation, skirting of wood flooring, etc.).
• Suitable for various substrates (metal, PVC, wood, concrete, gypsum boards, reinforced cement boards, marble, etc.).
Preparation
• Substrate surface must be dry and clean; free of dirt, grease, oil, or standing water.
• For a neat finishing, use masking tape and remove it within the working time.
• For sealant designs with depth of over 10 mm, use approved backing materials.
Application Direction
1. Surfaces must be clean, dry and free of dirt, grease, oil or water.
2. Surfaces should be cleaned with alcohol, M.E.K. or other suitable solvent. Do not use soap or detergent.
3. For a neat finish, apply masking tape and remove it before sealant skins over.
4. Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun.
5. Tool the sealant within 15 minutes of extrusion before it skins.
6. Allow to dry for one hour before applying water-based paint and 24 hours for oil-based paint.
7. Uncured sealant can be cleaned up with damp cloth.
Clean Up
• Wet sealants can be cleaned up with water.
• Cured sealants can only be removed mechanically.
Caution
• Contains a mixture of CMIT/MIT.
• May produce an allergic reaction.
• Keep out of reach of children.
• Safety data sheet available on request.
• For further health and safety information, consult the latest safety data sheet.
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.